The Fastest way to make holes with your Hydraulic Press Brake
Make multiple holes in seconds with the UniPunch system. Punch an entire row of holes in one stroke of your hydraulic press brake.
Hydraulic Press Brake Tooling Designed for Speed:
Do you have a hydraulic press brake? Need to process a large lot of parts? When it comes to speed, you get more with UniPunch hydraulic press brake tooling. UniPunch helps you get the job done fast. Go from spending several seconds making each and every hole to only moments punching multiple holes. This time difference stretched out over multiple units leads to huge savings on labor and time and boosts efficiency.
- Fastest Production Speed
Punch more holes in more parts per hour. If you’re finishing 400 parts in a day now, imagine 2,400 instead. Put your hydraulic press brake to work!
- Faster Into Production
We can provide most UniPunch brake press tooling within days, so there’s no need for you to wait months.
- Faster Setup Time
Don’t spend hours adjusting equipment when you can do it in just minutes. With our hydraulic press brake tooling setup time is minimal. Have a new part or need to change your tooling to fit new requirements? UniPunch makes it a cinch.
New customers receive 20% off
through December 31st, 2019!
Get Started Today & Contact Us About Your Job.
Our experts have helped thousands of manufacturers increase their speed of production. Speak to our experts with decades of experience working with manufacturers and machine shops like yours. See how you can receive the greater efficiency of our unique hydraulic punch press tooling.
Call us at 1-(800)-828-7061 or fill out the form below, and our team will recommend the right UniPunch solution for your needs.
What Materials Can It Punch?
With our hydraulic press brake punches, you get more than speed. You get versatility. Punch holes in a variety of materials. Check out our full list below.
What Punches Can It Make?
Have specific punches you need? You’ve come to the right place. UniPunch punch press tooling has several different options to meet your needs, and we offer customization.
Punch a variety of shapes in metal and other materials. Have a custom shape in mind? No problem. We can customize our punches to fit your needs.
UniPunch uses C-Frame technology to rapidly punch holes in metal and other materials. See how this unique system works along with its easy operation.
“When I came in, they didn’t know about UniPunch. It used to take them three weeks to complete 300 locks…now we’re making 600 in one week just because I knew about the UniPunch system and was able to teach them how to use it and pick up our production.”
– Lock Set and Door Hardware Manufacturer
“The operators like working with the tooling. Once it’s set up and you have your template made, it’s a breeze…just a snap.”
The Metalworking Group
“Without costing an arm and a leg, there is just no other way to do it. The labor would be outrageous.”
Press Brake Punching Case Study
Diversified Construction Co. came to UniPunch with the desire to increase their throughput. Before switching to our hydraulic press brake punches, they had measured channels out by hand then punched each hole individually. It had taken them at least two minutes per part. With our punch press tooling, they reduced that time to under thirty seconds per part, allowing them to go from making 20 parts in a day to over 100.
Get Started Today!
See how you can start your success story. Call us at 1-877-832-9034 or fill out a quote request.
Our team has worked with hydraulic press brake punches and tooling for decades, allowing them to give you the guidance you need to find the perfect solution for your company.
Let’s Discuss How UniPunch Can Help You
Tell us about your project, and we’ll recommend the right UniPunch solution for your needs.